
Who needs this work
Any business, nonprofit or government site that offers parking to the public needs accessible stalls. That includes retail centers, restaurants, clinics, churches, office buildings and the leasing office lot at an apartment community. The trigger is often a restripe, a new tenant, a resurfaced lot or a complaint.
The Texas rules sit in the 2012 Texas Accessibility Standards on TDLR's site. TDLR lists them as effective March 15, 2012, under Texas Government Code Chapter 469. Section 208 sets how many stalls you need, and section 502 sets how they are built and marked.
What TAS section 502 asks for
- Stall width: car stalls are 96 inches wide minimum. Van stalls are 132 inches, or 96 inches when the aisle next to them is 96 inches wide.
- Measuring: where stalls are marked with lines, widths are measured from the centerline of the markings.
- Access aisle: at least 60 inches wide, next to an accessible route, and marked so as to discourage parking in it. Two stalls may share one aisle.
- Level ground: stalls and aisles sit at the same level, with slopes no steeper than 1:48.
- Van height: van stalls, their aisles and the drive route to them need 98 inches of vertical clearance, which matters in parking garages.
- Signs: each stall gets the International Symbol of Accessibility on a sign at least 60 inches above the ground to its bottom. Van stalls also say "van accessible."
How many accessible stalls a lot needs
ADA.gov's parking guidance sets counts per lot, not per property. A lot with 1 to 25 stalls needs 1. Then 26 to 50 needs 2, 51 to 75 needs 3, 101 to 150 needs 5 and 201 to 300 needs 7. At least one in six must be van accessible. ADA.gov also says the stalls belong on the shortest accessible route to the accessible entrance.
Where a building has more than one accessible entrance with parking nearby, the stalls are spread out so each entrance has some close by. When stalls are added to an existing lot, ADA.gov's restriping brief says to put them on the most level ground near the accessible entrance. An accessible route from the stall to the door never has curbs or stairs and is at least 3 feet wide.
How the work is done
- Survey. The pro counts total stalls, measures existing accessible stalls and checks slope near the entrance.
- Plan. Stall count, van stalls and aisle locations are set against the TAS rules.
- Layout. Lines are snapped on the pavement, and the aisle hatching is drawn.
- Paint and stencil. Lines, aisle hatching and the accessibility symbol are painted.
- Signs. Posts and signs go in at the right height, if they are part of the quote.
Slope and curb ramps are not paint problems. If the best spot near the door is too steep, the fix may need concrete work, and the pro should tell you so.
Reported prices for accessible stalls
From Angi's 2026 striping guide, HomeAdvisor's striping guide and SealMaster's FAQ. These figures are national and not Dallas quotes.
| Item | Reported range |
|---|---|
| Accessible stall, painted with symbol | $25 to $50 each (Angi) |
| Accessible stall | $25 to $40 each (HomeAdvisor) |
| Handicapped stall | $25 to $30 each (SealMaster) |
| Custom stencils | $20 to $200 each (Angi) |
Signs and posts are usually priced on their own. See parking lot striping cost for the rest.
What to ask before you hire
- Will the finished lot meet the TAS stall count for each separate lot?
- Which stalls will be van accessible, and is there room for a 96-inch aisle?
- Are signs, posts and the "van accessible" plate in the price?
- Did you check the slope at the stalls and aisle?
- Will you give me a sketch of the final layout?
Accessible stalls usually go in with a parking lot restriping job. If the asphalt near the entrance is worn, pair it with parking lot sealcoating.
Areas we cover for ada parking compliance
Irving Garland Mesquite Carrollton Richardson Plano Grand Prairie Arlington Farmers Branch Addison Lewisville Rowlett DeSoto Duncanville Cedar Hill Lancaster Coppell Grapevine Balch Springs University Park
Striping FAQ
Does the access aisle have to be striped with diagonal lines?
TAS 502.3.3 says aisles must be marked so as to discourage parking in them. Diagonal hatching is the common way to do that. The pro will mark it so it reads clearly from a car.
Can two accessible stalls share one aisle?
Yes. TAS section 502 allows two stalls to share a common access aisle. ADA.gov notes the exception: angled stalls cannot share, and their aisle goes on the passenger side.
Do I need a separate sign for a van stall?
Yes. Van stalls need a sign with the words "van accessible" in addition to the accessibility symbol. ADA.gov says a lot with four or fewer stalls does not need the sign identifying the accessible space.
Is ADA striping a legal opinion on my property?
No. A striping contractor paints to the standards. For a formal review of a whole site, owners hire an accessibility specialist. We don't give legal advice.